Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
I will never learn

Cosmo_3
Member Posts: 845
I remember years ago I admitted to being a circaholic, and telling everybody on the wall I would seek help and change.
Then I looked at this pic from a recent job (candid shot taken with my own camera by homeowner that noticed it on the job site work table), and I can see I still need counseling.
Would all you wholesalers please heed Siggy's advice and rush to make the new generation of ECM motor based circs available to us as soon as possible...
After all, a watt IS a terrible thing to waste
Cosmo
Then I looked at this pic from a recent job (candid shot taken with my own camera by homeowner that noticed it on the job site work table), and I can see I still need counseling.
Would all you wholesalers please heed Siggy's advice and rush to make the new generation of ECM motor based circs available to us as soon as possible...
After all, a watt IS a terrible thing to waste
Cosmo
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements