Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Wallhung Lamborghini

Steve Ebels_3
Steve Ebels_3 Member Posts: 1,291
Is it really the same company that makes the cars?

Comments

  • Uni R_3
    Uni R_3 Member Posts: 299
    Modulating, condensing but not fast...

    Alu block & MCBA...

    Lamborghini Caldaie / Boiler
  • Weezbo
    Weezbo Member Posts: 6,232
    that looks sharp....

    did you check out the Thermal Flywheels? multi?

    A Solar Lamborghini with a clutch :)
  • Uni R_3
    Uni R_3 Member Posts: 299
    Hrmm... it was.

    I think that Lamborghini cars is now owned by Audi and/or VW, so they may now be separate companies - not quite sure. Ferruccio Lamborghini actually started out making tractors, and they still do (although it appears that deutz bought them). I guess there's more to life than fast cars and off-shore racing boat engines.

    http://www.samedeutz-fahr.com/lamborghini/
  • hot_rod
    hot_rod Member Posts: 23,385
    I saw that Lamborghni name on several

    products at ISH. Mostly burners.

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Eric_25
    Eric_25 Member Posts: 79
    American Standard

    I am being told, as an American Standard HVAC dealer, that this boiler is about to be sold as an American Standard boiler, yes they are getting back into the boiler business. No more details yet, I am expecting them soon.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • A Wholesaler
    A Wholesaler Member Posts: 9
    AS Boiler will be a Ferroli

    The boiler that American Standard will be adding to their line is a few series of boilers made in Italy by a company named Ferroli. They too had a nice boiler and equipment booth at ISH in Germany. Thier wall hungs seem nice and are coming the second or third round of the boiler introduction to the US.
This discussion has been closed.