Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Wall of Shame

Options
Brad White_9
Brad White_9 Member Posts: 2,440
that you are On the Case, Dr. Josh.

I know the good doctor is in the best care. Cannot wait to see and read the results...

Comments

  • Josh_10
    Josh_10 Member Posts: 786


    Here is a new one for the wall of shame. This fantastic boiler was installed in a $2.7 million dollar home. The homeowner called me in because his oil costs were through the roof.

    It is aprox. 3600 square feet of RFH with a Bradford White indirect. They used telestats on the manifolds for zone control and a single 3 way mixing valve for the RFH.

    I don't even know where to start on this one... First I hooked up my combustion analyzer and it pegged my CO sensor. Completly off the charts. I found out that the installer had not ever started up an oil boiler. The pressure was off by a whopping 40 PSI! I opened up the boiler and surely it was almost completely sooted up. I cleanen her out and tuned it up.

    Second the RFH had no pump at all. All heat somehow made it through the house from the boilers primary pump. No mixing was taking place at all. Not to mention no differential pressure by-pass.

    We are going to completly re-pipe the near boiler piping and retro-fitt some TN4 controls. I can't wait to see how much we are going to save our customer on fuel! I will post pics in a few weeks when we do the job.

    What bothers me the most about this whole situation? The contactor has half page ads for RFH and if you look them up in the phone book in bold letters it says "Radiant Floor Heating Expert!"... Oh well. I'd rather have a great reputation than half page ads!

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    What a mess

    they didn't even care about making the job look workmanlike. Can't wait for the "after" pics!

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,686
    Josh,

    any chance you could walk the job with a camcorder and post it to the Videos section? Could be a great teaching tool. Thanks.
    Retired and loving it.
  • Ruthe Jubinville_2
    Ruthe Jubinville_2 Member Posts: 674
    gas vs oil

    If this is an oil boiler system what does it have to do with the owner's gas prices being high
  • jim lockard
    jim lockard Member Posts: 1,059
    gas price

    driving to hotel to get warm. Go get em Josh, Best Wishes J.Lockard
  • Josh_10
    Josh_10 Member Posts: 786


    Sorry I meant "fuel costs". You know how it is when you are typing fast...

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.