Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

Gas Training in Rhode Island

August and September 2006 Schedule

Tuesday August 1 Fundamentals of Gas

Thursday August 3 Basic Electricity

Tuesday August 8 Circuitry & Troubleshooting

Thursday August 10 Steam Boilers & Piping

Tuesday August 15 Hydronic Controls

Thursday August 17 Multi Zone Panels

Tuesday August 22 Electric Ignition Systems

Thursday August 24 Forced Hot Water Boilers & Piping


Tuesday August 29 Advanced Electric Ignition Systems


Thursday August 31 Powerpile


ONE WEEK STRAIGHT

Monday Sept 11 Fundamentals of Gas


Tuesday Sept 12 Circuitry & Troubleshooting


Wednesday Sept 13 Hydronic Controls


Thursday Sept 14 Electric Ignition Systems


Friday Sept 15 Advanced Electric Ignition Systems


3 DAY COMBUSTION TESTING (NEW)

Monday Sept 18


Tuesday Sept 19


Wednesday Sept 20


PAYMENT MUST BE RECEIVED TO BE REGISTERED

ALL CLASSES WILL BE HELD AT
36 Market Street, Warren, Rhode Island
8:00 AM to 4:30 PM

Name ____________________________________________

Company _________________________________________

Street ____________________________________________

P.O. Box __________________________________________

City ____________________ State __________ Zip ______

Phone _______________ - _______________ - ___________

FAX Number ___________- ______________- ___________

e-mail address ______________________________________

SEND CHECK OR MONEY ORDER TO –

GAS APPLIANCE SERVICE TRAINING AND CONSULTING

22 GRIFFITH DRIVE RIVERSIDE, R.I. 02915

401-437-0557 FAX 401-270-1893

e-mail [email protected]

Comments

  • For an example of this training

    check HVACTV.com this evening to see the instuctor for these courses Tim McElwain going over SmartValve Troubleshooting.
  • Mitch_6
    Mitch_6 Member Posts: 549
    New combustion analysis

    can you give a basic outline on the "New" combustion analysis course.

    Mitch S.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Here you go Mitch -

    Outline 3 day Combustion Testing

    1. Characteristics of Gas
    2. Gas Combustion
    3. Carbon Monoxide
    4. Heat Loss- Furnace and Boiler Ratings/Burner
    Efficiency – Types of Efficiency
    5. Determining Input
    6. Draft Hoods/Barometrics
    7. Flues and Chimneys
    8. Burner Adjustment
    9. Burner Combustion Troubleshooting
    10. Draft
    11. Power Venting
    12. Combustion Testing Procedures
    13. Bacharach Combustion Tester
    14. Testo Combustion Testers
    15. Combustion Efficiency Charts
    16. Carbon Monoxide Inspection Procedures
    17. Design Gas Equipment Testing
    18. Combustion Analysis Test Procedure
    19. Testing of Actual Equipment
  • Add to that list

    Conversion Burners if there is an interest. We used to emphasize Conversion Burners in our combustion teaching but have now shifted the emphasis to design gas equipment.
  • Still lots of room

    love to see you there.
  • Mitch_6
    Mitch_6 Member Posts: 549
    Still trying to get Tom from my company

    to take a class with you or Dave "both would be better".

    I will see how things go and try for September.

    Do you have any classes that get in deep to pump sizing and calculating pressure drop and feet of head on FHW systems.

    Mitch S.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • We cover that in our new

    course Forced Hot Water Boilers and Piping. We do not get "deep" into it but cover how to size pumps, pressure drop and head on these systems. I use a video tape on this also from Weil-McLain.
This discussion has been closed.