Purging Taco i-Series 4 way valves

Ragu_4

Just got done with my first i- Series 4 way job and it was a BEAR to purge. I have another one to finish this week but I don't want to go through the same headaches; the second on will have glycol.

Both jobs are piped P/S as per Taco drawings and both have 1 1/4 primary loops. I went to the Webstone Valve site to look for their P/S purge tees to replace my copper closely-spaced tees but they only list 1 1/2 and up for their primary loop.

Does anybody make 1 1/4 x 3/4 and 1 1/4 x 1 P/S purge tees? Thanks.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=428&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Jeff Elston

Webstone

I found 1 1/4 PS purge valve tee right above the 1 1/2 I hope this works the link:

http://store.webstonevalves.com/Default.aspx?page=category search results&amp;CatList=5865&amp;Parent=71520&amp;tree=71482*WEBSTONE+EXCLUSIVE+PRODUCTS*0@@71511*PRO-PAL+SERIES+VALVES*0@@71520*FULL+PORT+FORGED+BRASS+BALL+VALVE+PRIMARY/SECONDARY+LOOP+PURGE+TEE+-+CxC+w/+REVERSIBLE+HANDLE+(600+WOG/150+WSP)*5865@@

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Ragu_4

Thanks Jeff

I guess I missed it on the first go 'round. Those look like a life saver to me. Thanks again.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"