Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Visio

Jed_2
Jed_2 Member Posts: 781
in THE MAIN WALL
http://www.tekmarcontrols.com/design.html

Comments

  • Brian
    Brian Member Posts: 285
    Visio

    I just got a new computer and added Visio to it.Does anyone know where I could get a hydronic template for it.

    Thanks
    Dobber
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Dobber, I believe Steve Wieland has that software. If he does not catch your post here I'm sure he would not mind you contacting him to find out where you can purchase that.

    Steve (Wheels) Wieland

    Avco Supply

    Phone:215-949-1550

    dwheels@voicenet.com or stevew@avcosupply.com

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • Simply Rad_2
    Simply Rad_2 Member Posts: 171
    Tekmar

    If you use Tekmar controls they have a large selesction of stencils for visio. Taco does also.
    Jeffrey
  • Firedragon_4
    Firedragon_4 Member Posts: 1,434
    Good choice,

    been using it for years and have done all of my book and seminar drawings in it.

    If you need the Tekmar stuff, just yell, I have it too! Bad news is I won't be back in the office until 6/13.

    BTW, play, play, play with it, the more you do the better you'll get with it, FACT!


    www.firedragonent.com

  • Firedragon_4
    Firedragon_4 Member Posts: 1,434
    Those are the

    one's I was referring too. Nice download, thanks Jed!


    www.firedragonent.com




    Direct link, JIC!

    tekmar



  • Brian
    Brian Member Posts: 285
    Templates

    I got the ones from the Tekmar site but can't them to open in Visio.Will give Hydronics Mike a call on Monday.

    Thanks
    Dobber
  • Jed_2
    Jed_2 Member Posts: 781
    Anytime, George

    I learn something from you and the Wall nearly daily.

    Jed

    p.s. It pays to visit the "Virtual Trade Show".
  • Firedragon_4
    Firedragon_4 Member Posts: 1,434
    Those are stencils

    so you have to make a new folder under 'Solutions'. Then put the stencils in there.

    My folder is simply called 'Tekmar', but I have taken most of the boilers and stuff and converted them to oil, that's a stencil simply called 'oil'.


    www.firedragonent.com

  • Firedragon_4
    Firedragon_4 Member Posts: 1,434
    Thank you Jed,

    very nice compliment to Dan and myself.
  • Mr.Bill
    Mr.Bill Member Posts: 10
    Visio

    We have a variety of stencils that we use for our ZCP application Drawings.

    If your interested e mail duane_spielman@danfoss.com. Duane is our "Captian Visio" in Calgary. drop him a line and tell him Bill sent you, I'm sure he will be happy to share.

    That goes for any one else also.
This discussion has been closed.

Categories