Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Offset for baseboard

Patchogue Phil_29
Patchogue Phil_29 Member Posts: 120
in THE MAIN WALL
It is ugly, but will be behind the cover and endcap.

I don'ty think it will be noisy but I want to hear some opinions if it will be.


Wish I had some PEX...

Comments

  • Patchogue Phil_28
    Patchogue Phil_28 Member Posts: 32
    Offset for baseboard

    Will this be noisy?

    Baseboard in bathroom. Walls used to have thick tile. Remodeled without tile on wall, so baseboard riser is too far into the room. The covers will not go on without moving the riser or making an offset.

    Will my offset make a lot of water noise? Pump is a 007 Taco.

    image

  • bob young
    bob young Member Posts: 2,177


    its xtra ugly but will work o.k. as long as it don't leak.
  • Robert O'Connor_12
    Robert O'Connor_12 Member Posts: 728
    phil

    Why don't you use a piece of soft tubing, or make some by annealing it.

    Robert O'Connor/NJ
  • Geo_5
    Geo_5 Member Posts: 69


    THEY HAVE 3/4" FLEXIES FOR THIS...NOT CHEAP BUT STILL...
  • Patchogue Phil_28
    Patchogue Phil_28 Member Posts: 32
    flexies?

    What's that?
This discussion has been closed.

Categories