Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
1 ODR for two Ultra's?
Floyd_21
Member Posts: 7
Uses one sensor for the outdoor temp. and does alot more with the Ultra boiler to boot!!! Seq. or Parr. mod., auto rotation,
WWSD, etc....
It's the ONLY way that I would run two Ultra's.
Floyd
WWSD, etc....
It's the ONLY way that I would run two Ultra's.
Floyd
0
Comments
-
If so How?
Can one outdoor reset sensor be used with two Ultra's? Anyone doing this and if so how did you do it?0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements