Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Replacing steam traps

Robert O'Connor_3
Robert O'Connor_3 Member Posts: 272
in THE MAIN WALL
we did some of these a few years back for a job in Minnesota. i'll look up the files when i get to the factory in Monday.

Comments

  • Bert_3
    Bert_3 Member Posts: 1
    Stream Trap replacement

    On my steam traps I find the name OE Speialty Mfg. I need to repair some of the traps. How can I find a replacement? I have a two-pipe steam system. The pipe going into the trap is 1/2 inch.
  • Jim Bennett
    Jim Bennett Member Posts: 607
    Interesting...

    I have never heard of that one and can't find it in my Tunstall catalog either. Can you post a picture?

    Jim

    There was an error rendering this rich post.

  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Jim, they were the same people

    who marketed the O-E Vapor system shown in Lost Art.
  • Robert O'Connor_3
    Robert O'Connor_3 Member Posts: 272
    OE traps

    it looks as though what we did was modify one of our EC2 traps, with a longer tailpiece and replaced the OE units. regards,tp
This discussion has been closed.

Categories