Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
radiator indentification

Dick Case
Member Posts: 3
I have a project with 3 types I can't Identify with the E.D.R. book....
1 type has "St. Louis Standard" markings. My notes were taken quickly, that might be "St. Louis STD." They look similar to a Rococo or Florentine. They are 3-column
The second type is unmarked and similar to the above.
The third is a small bathroom wall unit. 24x8" with a plain cast cover and 5 "slots" in the top of the face.
I have pictures of these that can be e-mailed if necessary.
Perhaps I am not looking in the right place for markings?
I'd appreciated any clues.
1 type has "St. Louis Standard" markings. My notes were taken quickly, that might be "St. Louis STD." They look similar to a Rococo or Florentine. They are 3-column
The second type is unmarked and similar to the above.
The third is a small bathroom wall unit. 24x8" with a plain cast cover and 5 "slots" in the top of the face.
I have pictures of these that can be e-mailed if necessary.
Perhaps I am not looking in the right place for markings?
I'd appreciated any clues.
0
Comments
-
Close Enough
I would take one from the book that is simular to shape and size.Then you couldn't be off by more then 10 percent....0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 951 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements