Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
taco circulator
carol_3
Member Posts: 397
Right on. I do love that wave when I do something nice in traffic.
0
Comments
-
taco oo7 circulator
I need to know, how many GPM does the oo7 pump rates ?0 -
Taco.com
A nice web sight that has all the info you are looking for. Flow will depend on pipe size and length for rated head/GPM/BTU you wish to convey.
Mike T.0 -
007 operating characteristics
Good Morning
Your question is not unique, and not easily answered with a specific number. Every centrifugal pump has a flow/head curve and the net flow is dictated by the system resistance. If you look at the 007 performance curve you will see it can create approximately 12 feet of head at shut off, and will deliver approximately 22 gpm when pumping against little or no resistance. Where the 007 operates on its curve in your system is dictated by the system dynamics.Joe Mattiello
N. E. Regional Manger, Commercial Products
Taco Comfort Solutions0 -
Thanks for the good info, guys.0 -
No reply
It would be so nice if the ask-er of the question would reply so that we know that his or her Q: were answered. It's kinda like letting someone out into traffic in front of you and they do not wave as a gesture of thank's.
Mike T.0 -
Here in Boston, Carol
we always wave.
Some of the time we actually use all five fingers
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements