Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Auction for Alan to ISH

Options
Alan R. Mercurio_3
Alan R. Mercurio_3 Member Posts: 1,624
Tim, Thank you so much. I truly appreciate this. and thanks to all of you that have already placed some awesome bids!

Your friend in the industry,<BR>Alan R. Mercurio

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=408&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

There was an error rendering this rich post.

Comments

  • I am auctioning for Alan Mecurio

    a set of my newest manuals valued at around $250 in order for Alan Mecurio to go to ISH. He is very deserving of this opportunity. The winner will mail a check or whatever way is best to Dan and I will ship the manuals to the winner.

    We can run this until 10 PM EST Wednesday July 12th.

    Some information on the manuals follows:

    Fundamentals of Gas Volume I

    This manual is a must for the new technician who is working on gas equipment. I have taken the manual I use for my seminars and written it out as a readable version. This manual has everything I say in teaching the course written out for you. If you cannot attend a seminar this manual is the next best thing.

    The subjects include:

    Fuel Gases Natural Gas Facts

    Combustion Gas Burners

    Gas Pilot Assembly Orifices

    Gas Pressures Burner Problems

    Carbon Monoxide Mechanical Controls

    Gas Pipe Sizing

    The manual is up to date with the latest
    National Fuel Gas Code and International Fuel Gas Code.


    NEW FUNDAMENTALS OF GAS
    VOLUME II

    This is the second manual in this series and is a companion to Volume I. It covers Air for Combustion and Venting and Ventilation. It is a complete manual on both subjects covering all of the latest code requirements.

    The subjects covered in the manual include:

    Air for Combustion & Ventilation,

    Introduction to Venting,

    Venting requirements, specifications, design and construction,

    Conventional Venting Systems - Masonry, Metal and Factory Built Chimneys, Gas Vents, Selkirk Metalbestoes Handbook with modifications

    It also contains:

    Single Wall Pipe, Through the Wall Vent Termination, Vent Connectors for Category I Gas Utilization Equipment, Draft Hoods and Draft Controls, Manually Operated Dampers, Automatically Operated Vent Dampers and Flue Sizing Examples using the latest tables from NFPA 54 National Fuel Gas Code.

    NEW
    MANUALS FOR SERVICE TECHNICIANS OUR LATEST RELEASE

    Circuitry and Troubleshooting Volume I

    NEW
    APPLIED ELECTRICITY FOR GAS APPLIANCES

    PARTS OF AN ELECTRICAL CIRCUIT

    ELECTRICAL TERMS

    ELECTRICAL RELATIONSHIPS

    CIRCUIT COMPONENTS AND SYMBOLS

    ELECTRICAL CIRCUITS AND DIAGRAMS

    CONTROL CENTERS

    TEST EQUIPMENT

    COMPLETED WIRING DIAGRAMS OF HEATING SYSTEMS

    Circuitry and Troubleshooting Volume II

    NEW

    THERMAL ELECTRICITY AND ELECTROMAGNETISM (THERMOCOUPLES)
    THERMOSTATS, GAS VALVES, TRANSFORMERS

    Who will be the first to bid???









  • Ron Schroeder
    Ron Schroeder Member Posts: 995
    I sir will step up

    $100.00
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,686
    Thanks to all of you.

    Especially Tim.
    Retired and loving it.
  • Ken from Maine

    has it so far anyone else want to jump in for a great cause. You have until Wednsday July 12, to make a bid.
  • Awesome bids yes

    but come on we can go a little higher here for our friend Alan.

    These manuals cover much of what I go over in a two to three day seminar which would cost almost $700 not including your gas and hotel. Good stuff for very little money.
  • 3 days left

    top bid is $150 do I hear $175????
  • $175

    I'll bid $175
  • Ron Schroeder
    Ron Schroeder Member Posts: 995
    I'll bump it to $200.00

  • We have $200 anyone

    want to go $225?
  • One more day folks

    come on I am sure someone want to bid $225.
  • At this time tomorrow

    night (10 PM) it will be all over get your bid in now!!!
  • Very good Gary. . .

    now might it be possible that we could get $250, you have until 10PM tonight.
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 19,602


    I'm cheap. I'll go $235.00


    Ed Buckley
  • Ed Buckley is the

    winner at $235.00, congratulations Ed! If you will e-mail me the address to send them to we will get them out to you.

    You can unless Dan wants to do otherwise mail him a check for $235.

    Thanks to all who participated we raised a good amount for Alan.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,686
    Thanks to both of you!

    Yes, please write and mail the check to me. Thanks.
    Retired and loving it.
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 19,602


    Tim,

    Thank you, Iwill e-mail my address.

    Dan,

    Thank you, the check is in the mail.


    Ed
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Ed and Tim thank so much. This is so wonderful what you're all doing.

    Your friend in the industry,
    Alan R. Mercurio

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

    There was an error rendering this rich post.

This discussion has been closed.