Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

GlowCore Boiler questions

Dave Yates (GrandPAH)_1
Dave Yates (GrandPAH)_1 Member Posts: 364
in THE MAIN WALL
the wrong, or perhaps missing, orifice in either the air or gas feeds.

Blockage midway through the HX is another possibility from broken ignitors accumulating.

Last, but not least, ours had a leaking gasket just prior to getting the heave-ho.

Yank the tank!

Comments

  • [Deleted User]
    [Deleted User] Posts: 0
    HIGH CO problem

    My service manager went out on a trouble call on a GC boiler, and could not get the CO down. It kept locking up his analyzer it was so high. He pulled the air filter, which was dirty, but made no difference. In looking at the manufacturers specs, they don't even mention CO. Is it the nature of the beast? I wouldn't think they are allowed to generate more than 400 PPM, even new.

    Experience any one? My gut say yank the old and put in a new one...

    TIA

    ME
  • Unknown
    Unknown
    Wouldn`t fault ya,

    for yanking it out Mark,,I have some stuff here on the GB, if it helps I can Email it all to ya.

    Dave
This discussion has been closed.

Categories