Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Intake/Exhaust profile
kevin coppinger_4
Member Posts: 2,124
it is your only real option...even the concentric Munckin is not as shallow...kpc
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=323&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=323&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Intake/Exhaust Profile
Need to find a mod/con (80-90K BTUs) that offers a relatively shallow intake/exhaust kit. The intake/exhaust is going to exit in the driveway area and it has to fit rather snuggly to the house. Most of the mod/cons I've seen lately offer kits that extend 6-8" off the outside wall. I would like to find a nice unit (like the Knich or Ultra) that can offer what I need. Any suggestions?0 -
Sidewall Termination
The Weil McLain termination kit will fit the bill nicely. Comes shipped with every Ultra. Check it out at their website. Look in the Vent Supplement pdf.
Tom G0 -
Ice
One thing to consider is that you may have ice buildup on your siding if the termination is too close to the side of the house.0
This discussion has been closed.
Categories
- All Categories
- 86.1K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 155 Indoor-Air Quality
- 3.4K Oil Heating
- 62 Pipe Deterioration
- 907 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.7K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements