Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Cyclotherm
dmy hvac
Member Posts: 33
was wondering if anyone has ever heard or ever worked on any cyclotherm boilers and could tell me what they thought of them and how old they thought the boiler was. thanks they are mainly big industrial boilers.
0
Comments
-
what would you like to know ..
they are now produced by an equipment broker0 -
cyclotherm
what do you mean built by a broker?0 -
Cyclotherms...
Were a well made steel fire tube boiler maker, not unlike C/B, Superior, Kewanee, et al.
The boiler is almost generic in nature, the burner being the "unique" component. Many of these boilers were fitted with "other" brands of burners. Many after-market burners exist, IC, Webster, Power Flame, Ray, and a few OEM's as well.
Most are capable of very high efficiencies and burn oil (all forms) or gas (NG and LP). Virtually all have flame modulation.
Most are not serviced/repaired by the OEM, but rather special repairmen who specialize in either welding, or burners and controls.
Does yours have the original Cyclotherm burner, or something else?
Here's a link: http://www.cyclothermboilers.com/Files/CyclthermProfile.pdf0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements