Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Special Boiler Training Seminars

you an e-mail.

Comments

  • Training on Modulating/Condensing Boilers

    Gas appliance Service Training and Consulting and

    Gas Training Institute Presents:

    SPECIAL BOILER CLASSES

    Wednesday May 23

    Chuck Shaw

    Heat Transfer Products Contender/Munchkin $50

    Wednesday May 30

    Glenn Stanton

    NEW Burnham Freedom & CHG Boilers $50

    Wednesday June 13

    Mark Hughes

    Laars NEW Endurance and Mascot Boilers $50

    PAYMENT MUST BE RECEIVED TO BE REGISTERED

    SEATING IS LIMITED

    ALL CLASSES WILL BE HELD AT

    338 Metacom Ave.,

    Warren, Rhode Island

    8:00 AM to 4:30 PM

    Name _____________________________________

    Company ___________________________________

    Street ______________________________________

    P.O. Box _________________________________

    City _______________ State _________ Zip ______

    Phone ________ - _______________ - ___________

    FAX Number____- ______________- ___________

    e-mail address _______________________________

    SEND CHECK OR MONEY ORDER TO –

    GAS APPLIANCE SERVICE TRAINING AND CONSULTING

    22 GRIFFITH DRIVE RIVERSIDE, R.I. 02915

    401-437-0557 FAX 401-270-1893

    e-mail gastc@cox.net
  • Jim Pompetti
    Jim Pompetti Member Posts: 552
    Tim

    how about a correspondence course , for those how can make the trip?
  • I wish that were

    posible. Maybe you can convince those boiler folks to come to your area.
  • LOCAL TRAINING

    James,

    Don;t forget to check out www.avcosupply.com and look at yor local training seminars. I try and list all the local training.. at least the ones I am made aware of.

    Steve
  • mtfallsmikey
    mtfallsmikey Member Posts: 765
    Need to

    Take these shows on the road my friend! I live in Va.
  • Weezbo
    Weezbo Member Posts: 6,232
    Local distributors ought to get the message out....

    *~/:)
  • Weezbo
    Weezbo Member Posts: 6,232
    That sounds like a fine idea this Sunday.

    *~/:)
  • JohnNY
    JohnNY Member Posts: 3,229
    Granted, this may be none of my business, but....

    Tim, if you're going to post something like this and use this privately-owned forum to advertise your paid services and "bump" your old threads to the top periodically as you do, have you ever felt it may be appropriate to at least buy a "Find a Professional" ad?

    Couldn't it only help?



    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • I do not post my own

    seminars here anymore and have not for several years. This posting for special boiler classes is done to help out the trades people who may visit here and want to get trainng on these boilers. They are priced way below what I normally charge for my seminars simply to insure that if people sign up they show up. The truth be known I do not make any money on them. I do not put my business on Dan's area for professionals as I do not classify myself as one who is involved in the installing of equipment and I am therefore not a professional in the truest sense but offer training services only and do not feel it is appropriate to advertise in that venue.

    I do however have permission from the host to post this information here. I will not however post ever again as I do not want to cause him any concern by letting me do something that offends. I am very sorry if I have offended anyone, you have my deepest apologies. I only try to post here and in other sites (Oiltechtalk,HVACProTech and Firedragons sites) to help the trades people who may visit there. It is my policy and has been for sometime to give away a lot of what I could be selling. I do however have to make a living.

    Again my deepest aplogy to all who post here if I have offended you. I will be very careful in the future what I post here.
  • JohnNY
    JohnNY Member Posts: 3,229
    Find a Pro, not find a contractor.

    I don't think anyone was "offended", Tim.
    I just thought that if you're advertising seminars here, it might be nice to have some information about you included in a link at the bottom of your posts.
    ...something that lists your qualifications for teaching to the trade.

    I think not ever posting again would be a an overreaction.
    Perhaps I should be the one apologizing.


    I'm terrible at minding my own business lately.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • Mad Dog!!!!!!!!
    Mad Dog!!!!!!!! Member Posts: 157
    In defense of Timmie Mc Elwain..................................

    John, you are a good friend as well as Timmie. Let me make that clear. That being said, having been at The Wall for the last 6 or 7 years, I have seen Timmie - many times over - offer his expert advice. He'll even correspond via email or phone for people who NEVER EVEN WENT TO HIS CLASSES OR BOUGHT ONE OF HIS MANUALS. It is not my business whether Timmie has an ad or not, but I MUST say, he has been a major contributor over the years. I studied at Timmie's School on two occasions and even sent an employee for a week. After taking Timmie's classes there has not been a wiring problem that I could not (eventually) figure out. On top of that, I don't know HOW the man makes any money....he should charge atleast double what he does. Peace guys. Your friend. Mad Dog
  • JohnNY
    JohnNY Member Posts: 3,229
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • Mad Dog_2
    Mad Dog_2 Member Posts: 6,879
    Timmie...its been a few years........

    I think Albert and I are gonna come up for it. What are the dates? One day seminar. Count us in. Mad Dog

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Time is running

    out, sign up now.
  • Al Corelli
    Al Corelli Member Posts: 454
    Mad Dog

    Are you guys driving up?

    I'll drive if you want.
  • First class is next Wed

    May 2nd sign up now still some room.
  • Filling up

    fast get your money in.
  • Just a reminder more

    classes coming up.
This discussion has been closed.