Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

New Install

HitzKup_2 Member Posts: 45


  • Moses
    Moses Member Posts: 93
    Latest New Boilers Install

    This is our lattest new boiler room. We have there 2, Larrs Pannant boilers, 1,000,000 btu input each, 2, Apollo ATC Mixing Valves, 34HL series, 2 Turbomax model# 109, 2, Cash Acme 160 gal. expansion tanks, 1, 4" Caleffi hydronic Separator. We are supplying hot water for 14 Showers. 3, fan coil units, 2, heating coils for Mikva pools.
  • David Sutton_6
    David Sutton_6 Member Posts: 1,079
    Hi Moses

    Wow,, i had to keep checking to see if those pipes were sweated, thats a fine looking job!! very neat and professional looking!!!

  • Dave_4
    Dave_4 Member Posts: 1,405
    Brilliant... just Brilliant...

    More of a Mitzvah than a Mikva :)

    I presume that the "W" shapes are for thermal expansion or for fluid mixing? Nice touch. It will be a shame to insulate it.

    You probably get this all the time, but, "are you going to go back and solder the joints now that you set them up dry so nicely?"

    Stunning work!
  • Moses
    Moses Member Posts: 93

    The solder joints are done by passionate mechenics, who take pride in thier work.

  • Weezbo
    Weezbo Member Posts: 6,232
    looks Like a Take *~/:)

    Nice WORK! that must be quite a few man days into the work....i like your trust buh verify gages:)
  • David Sutton_6
    David Sutton_6 Member Posts: 1,079
    It Shows!!!

  • Paul Rohrs_4
    Paul Rohrs_4 Member Posts: 466
    Laars, Damn Laars, and Statisticians...

    Is what Mark Twain once said. Maybe he meant "Liars" instead of Laars.

    Nice work Moses. Pleasure meeting you and Kal last month.


This discussion has been closed.