Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

In-floor manifold parts

Options
Dick Carlson
Dick Carlson Member Posts: 13
in THE MAIN WALL
We are looking for a source for some valves for a brass In-Floor manifold. The casting says Giacomini #40. Any help would be appreciated.

Comments

  • Josh_10
    Josh_10 Member Posts: 786


    Well I know that they make really fancy faucets. I would look for a supplier that carries the faucets. They may not want to but I am sure that they can get access to the manifold parts. I am just guessing that you have your work cut out for you because this is primarily a european product.

    On a funny note I installed a Giacomini towel warmer a couple of years ago. I fought the homeowner because I thought that the fittings were too flimsy. A couple weeks later their 10 year old was climbing on it and well to make a long story short he knocked the fittings loose and flooded their $3.2 million dollar home. Wouldn't have happened with a Runtal!
  • Al Letellier_9
    Al Letellier_9 Member Posts: 929
    in-floor parts

    Check with Robert Mcdonough at Radiant Living Inc. he used to sell the stuff and we installed a few of his systems. Maybe he can give you a lead. Last phone # I had for him was 207-698-5433. Tell him you got to him through Al @ ACL P&H.
    good luck!!

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • [Deleted User]
    [Deleted User] Posts: 1,160
    Giacominni = Zurn...

    Not sure who owns who, but do know they are related.

    ME
This discussion has been closed.

Categories