Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
4A Valve
Steamhead (in transit)
Member Posts: 6,688
very small systems where the length of the main is less than 15 feet or so of 2-inch pipe. I can't count the number of these miniscule things that I've taken off and replaced with Gorton #2 vents.
Get Gerry Gill and Steve Pajek's e-book on balancing steam systems, it has all the charts you need. Order it on the Books and More page of this site. All proceeds go to charity.
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=367&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
Get Gerry Gill and Steve Pajek's e-book on balancing steam systems, it has all the charts you need. Order it on the Books and More page of this site. All proceeds go to charity.
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=367&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Has anyone used
a Hoffman #4a on a main before?? or just 75's? Hoffmans web site recommends 4a's for residential and small systems, but I don't see them around that much.0 -
Had them on mine once. They don't vent much.0 -
Thanks Steamhead
I'll check that out........0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements