Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Oilstock I Pics! (Steamhead)

Steamhead
Steamhead Member Posts: 17,628
in THE MAIN WALL
which I didn't remember hearing before so it was worth telling. Makes a pretty good case for carrying a CO monitor on your belt.

I told a few CO stories too.
All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting

Comments

  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    It started in the lobby

    of the Hamburg Microtel Inn, the night before. Left to Right: Judy McElwain and her friends, Tim McElwain, Alan Mercurio.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Bill Wolfe from Honeywell arrived

    On to the bar!
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Pappy T's

    at the Microtel, with Glenn Harrison (who managed to get away this time) and Scott Lutz.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Dinner was served

    Yusuf Celebi from Brookhaven joined us.....
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    The crowd got bigger

    Left to right: Yusuf, Ron and Linda Wheeler, Bill, Captain Riello whose secret identity is Bill Tice, Alan hiding behind Tim, Scott, Glenn.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Captain Riello and Alan

    talking burners.....
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Driving down Hex Highway

    which Tim remembered when it was US 22, we see a familiar name on a street sign.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    The Training Center

    comes into view...... look at all those cars!
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    And here we are!

    Oilstock in a tent.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Alan kicked it off

    as Leo Janssens looked on.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Judy Garber, the Goddess of Oilheat Speaks

    on receiving $645 from the raffle, which will go to Oil Heat Cares. Danfoss's Peter McKernan looks on.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Raffle Time

    Betty Johnson (Scott's better half) draws winning tickets...
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Captain Riello won

    a gauge kit.....
  • tommyoil
    tommyoil Member Posts: 612
    Great job Frank

    And it was great to finally meet you. It was good to talk shop and pick your brain. Let me know on that material I showed you. We'll work something out I'm sure. Please tell TLN that we all missed her company. Thanks again for your time. The pleasure was all mine.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    TommyOil Szymanski won

    a QuickRead unit.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Leo won too

    we don't remember his prize though....
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    The \"Making Friends in the Industry\" table

    Judy, Dave Gentle (spelling?), TommyOil.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    The Chimneys and Venting table

    Tim, Harvey from Energy Kinetics, Jim Wood, Mike Ellis.
  • tommyoil
    tommyoil Member Posts: 612
    It was the OnWatch

    diagnostic tool for the 7184 controls. It will go good with my OnWatch Kit. Its been awhile since I won anything. I swear my face still hurts from laughing when Santoro asked (when his number got drawn) if he could win the rest of the roast pork. Today was a no lose for all involved.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Captain Riello

    sitting next to a Beckett. With him is Craig Butler of Beckett, Ron Wheeler, and you can just barely see Andrew Georges.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Beckett NX live firing

    demonstration...................
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    with Craig

    at the controls.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    And who's

    that funny-looking guy on the right?
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Inside the Classroom

    Scott and Mike Murphy of the News, talking shop.
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Alan and daughter Toni

    showing one of the many books donated by Dan Holohan. Thanks, Dan!
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Toni accepts

    the Danfoss Nozzle award ;-).

    Thanks Alan, Scott and everyone else who contributed to Oilstock I.... see you next time!
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,616
    Wonderful day!

    I hope I can make it to the next one.

    Thanks to everyone who supports our friend, Alan. I hope his new training center is a huge success.
    Retired and loving it.
  • John R. Hall
    John R. Hall Member Posts: 2,245
    Ditto that

    Hope I can make the next one Alan. I assume my boss represented well. :-)
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Dan, thanks for your friendship and all of your support for this great event we had and many other area's of my business. You know you're invited to the next one and for the record knowing where you were spending your time this weekend I would not have chenged them plans either!

    Thanks for being you.

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Your assumtions are on the money, John. Mike is an awesome guy and really appreciated having him with us. (we still missed you of course)He spent the entire day with us and interviewed many of our friends in the industry.

    He took a lot of time with both Scott and I to make sure he got every detail about the training center and what our hopes for it's future are.

    Thanks again John for making all this possible!

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • J.C.A._3
    J.C.A._3 Member Posts: 2,980
    Alan and Crew,

    Looks like everyone had a great time and Ma Nature did a wonderful job providing a beautiful day.

    I now really regret not being able to attend! Thanks for the photos Steamhead. Hope Mike Santoro didn't make a hiney of himself! ( btw, did he regale you all with his CO story?...SCARY STUFF!)

    Congratulations Alan, looks like you and Scott have made an extremely positive step in ensuring that educational services will be readily available to the future. Big hand for both of you....(and the crowd goes wild!) Chris
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Chris,Once again I truly understand your not being able to be with us. you were missed but I look forward to having you join us next year.

    Mother Nature was very good to us. Today was much hotter than Friday.

    Thanks for the kind words.

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • ed wallace
    ed wallace Member Posts: 1,612
    oil stock

    Alan I really had a great time but it looks like no one got my ugly mugshot maybe thats a good thing at least i am not buying steamhead a camera

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories