Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

piping radiators with monoflow tees

joe_61 Member Posts: 21
Also could I use for example A inch x 3/4 tee and then increase my 3/4 branch up to 1 inch will It work.


  • joe_61
    joe_61 Member Posts: 21
    piping with monoflow tees

    I would like to repipe a one pipe system hot water into three zones, on cast iron radiators.Each radiator comes down to the basement with one inch supply and return from rad. What size monoflow tees do I need.And what size branch line on tee
This discussion has been closed.