Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

duro dyne mf-12

Options
hvactommy
hvactommy Member Posts: 2
in THE MAIN WALL
We've got a new duro dyne mf-12 pin spotter in our shop and it keeps misfiring and burning holes into the duct work. Never a a problem with our old one until it finally died. Any suggestions? The weld time cycle is as low as possible.

Thanks in advance for any help.
This discussion has been closed.

Categories