Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

One more question about tying in a reducing tee off the main.

Daniel_3
Daniel_3 Member Posts: 543
in THE MAIN WALL
What do you guys usually do for installing a new tee off an old steam main? Would you cut the main and proceed to use a close nipple, union, and a tee after threading the main? I would think it very difficult to thread an older 2" main, no?

Comments

  • bob young
    bob young Member Posts: 2,177
    weld method

    HOW about drilling & weding on a boss. [thread-o-let.] you can thread the pipe with no problem. easy if you own a ridgid 700 & know how to use it.
This discussion has been closed.

Categories