Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Massachusetts Code Training

GasNetworks_6
GasNetworks_6 Member Posts: 4
in THE MAIN WALL
we're up to 95 already and we're still over two weeks away. Don't get shut out. We can only accomodate 150 or so people!!

Comments

  • GasNetworks_5
    GasNetworks_5 Member Posts: 2
    MA Code Training

    Training Seminar on the Updated Fuel Gas and Plumbing Code
    February 16, 2006 : 5-8 pm (Dinner 5 pm)

    The Carriage House
    Eastern States Exposition (The Big E)
    1305 Memorial Ave.
    West Springfield, MA


    Due to overwhelming demand, GasNetworks has added an additional training seminar on the recent revisions to the Massachusetts Fuel Gas and Plumbing Code

    GasNetworks is sponsoring these training sessions for local inspectors and plumbing, heating, and HVAC contractors. Learn about sidewall venting, combustion air, chimney venting, and GasNetworks Rebate Offers.

    Just $25 per person includes a hot/cold buffet dinner and reception!

    We'll begin with a wonderful buffet dinner and reception at 5 and get right into the training seminar a 6 pm. There will be an opportunity to purchase the new code books at a special rate after the seminar!

    IMPORTANT: Seating is limited, don't be shut out. Register today!

    TO REGISTER, PLEASE CALL 1-800-662-9222
  • GasNetworks_5
    GasNetworks_5 Member Posts: 2
    training

    A few of us attended the December seminar and it was very informative and worthwhile. Highly recommeded. great food too!
    Thanks
  • DB_7
    DB_7 Member Posts: 2
    MA Code

    Count me in!
  • DB_7
    DB_7 Member Posts: 2
    Carriage House

    At the Big E is really a nice place for a gathering.
  • GasNetworks
    GasNetworks Member Posts: 74
    The next day

    begins the huge camping and RV show at the expo grounds.
  • GasNetworks
    GasNetworks Member Posts: 74
    Forgot

    to mention. You can always get more info on this training opportunity, as well as others, at www.gasnetworks.com

    Thanks
  • GasNetworks
    GasNetworks Member Posts: 74
    Mailing

    going out today.
  • Jim_53
    Jim_53 Member Posts: 8
    MA Fuel Code Training

    Went to the training at Berkshire Hills Country Club. Very informative. Sign-up early. It will sell out!

    Manny
  • GasNetworks
    GasNetworks Member Posts: 74
    you

    are correct. Both the Swansea and the Pittsfield sessions sold out.
  • Frank_42
    Frank_42 Member Posts: 2
    Swansea

    I attended the seminar at the Venus in Swansea and thought it was very well done. Highly recommended.

    Joe
  • Frank_42
    Frank_42 Member Posts: 2
    RV Show

    this is a pretty good show. There are a bunch of reasonable hotels and motels right nearby if you wanted to hit the show the next day.
  • Geo_6
    Geo_6 Member Posts: 2
    Gas training

    Anything coming up closer to Boston,West Springfield's quit a haul.
  • Geo_6
    Geo_6 Member Posts: 2
    Gas training

    Anything coming up closer to Boston,West Springfield's quit a haul.
  • GasNetworks
    GasNetworks Member Posts: 74
    Starting to fill up

    Don't wait too long. The previous two sessions last month filled up fast!

  • GasNetworks
    GasNetworks Member Posts: 74
    reminder

    only 3 weeks away!
  • JOHN_103
    JOHN_103 Member Posts: 54


    will there be anything closer to boston?
  • GasNetworks_6
    GasNetworks_6 Member Posts: 4
    Yes.

    We're working on setting up a couple sessions closer to Boston. Maybe Waltham area? Any suggestions?
  • Mitch_6
    Mitch_6 Member Posts: 549
    Training location

    Lantanas in Randolph always works
  • Geo_7
    Geo_7 Member Posts: 2
    Training

    I second Lantanas.Not only because it's 10 minutes from my house they put out one hell of a spead (Breakfast,Lunch or Dinner).
  • GasNetworks_6
    GasNetworks_6 Member Posts: 4
    Code trainings

    OK. We'll look into Lantana. I know they do a great job over there. We moved our annual Heating Professionals and HVAC conference there a couple of years ago and it's worked out great. Watch for it September 8, 2006!
  • GasNetworks_6
    GasNetworks_6 Member Posts: 4


  • GasNetworks
    GasNetworks Member Posts: 74
    Almost

    sold out. We're at 127 today. Register soon!
This discussion has been closed.

Categories