Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
1940 copper radiant house
Options
ANTHONY_11
Member Posts: 3
I NEED TO PRICE A JOB FOR A BOILER REPL.THAT HAS A OLD COPPER RADIANT SYSTEM.THE MAINS ARE 2"STEEL W/1/2"TEES FOR THE COPPER TUBING IN THE FLOOR.MY MAIN CONCERN IS WHAT PUMP TO USE.THE CURRENT PUMP IS A 2"3/4OR"1 H.P. B&G PUMP.THE HOUSE IS ONLY 1 FLOOR.ANY SUGGESTIONS.
0
Comments
-
In all liklihood,
You could use a 007 or equal. The original circs, were either S-100's or TACO 110's0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements