Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Upstairs is toasty, downstairs is cool.

Greg T.
Member Posts: 2
Why might the second floor of my house be so toasty warm, yet the first floor be much cooler? The radiators on the second floor are warm/hot to the touch, yet the first floor radiators are cool or warm at best, unless I really "crank up" the thermostat.
0
Comments
-
Is it a gravity HW system?
Is it all on one zone?
If the floors are zoned separately I would start there with circulator operation, venting, all the usual common sense things like power to the circulator or control valve...
If it is a gravity HW system it is common for upper floors to heat first (higher differential pressure). Orifice plates may have existed originally and tossed out over time if the radiators were moved for painting for example.
Many variables in the Naked City. Those are just two.0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 106 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 978 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements