Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Roth fuel tanks
Options
brucewo1b
Member Posts: 638
0
Comments
-
Roth fuel tanks
Recently had a Roth rubber tube suction assembly sucked shut on a interior 400 gal tank, one year old. Problem occurred one week after fuel filter was replaced at reg. service. Roth said they don't recomend sucktion assembly, I should replace with double tap tank bushing and hard pipe. This is a single pipe system with about 15' of 3/8"od tubing. Does anyone else have problems? Thanks.
0
This discussion has been closed.
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 120 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements