Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Looking for some information

Andy Stack_3
Andy Stack_3 Member Posts: 39
in THE MAIN WALL
I am looking for some information. I am working on a commercial project with two steam boilers heating 3 buildings: a church, and 2 schools. They have zone control valves. Is there any way to use hour timers, flow meters or something else so that we can separate accurately the cost of gas usage for each building?
Thanks for the help.

Comments

  • Joe Billow_6
    Joe Billow_6 Member Posts: 69


    most places program there own flow when programing the boiler controls through a PLC. I would contact Watts or McDonnell & Miller they may have something.
  • bob_111
    bob_111 Member Posts: 6


    back in the 50's & 60's there were condensate meters used
    on district steam. one was Cadilac meter. the home owner was billed by the amount of condensate that passed thru the
    meter.
This discussion has been closed.

Categories