Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

BIG thanks to Laars!!!

Options
Timco
Timco Member Posts: 3,040
in THE MAIN WALL
See the Laars Endurance thread below a couple days...They were a big help in tracking down poor test results. High CO and low O2 and high stack temp. See the printouts. # 2 was on high fire. Solution: New, correct orifice and an air shutter kit to control things. Cannot downfire the unit any farther and still be within Laars parameters for offset pressure.

Tim
Just a guy running some pipes.

Comments

  • Timco
    Timco Member Posts: 3,040


    A BIG shout out and thanks to Laars...Bill Marchant & Mike Elomre...for going above & beyond the call of duty in assisting with some adjustment problems. Thanks for the time & effort to help the individual.

    Tim
    Just a guy running some pipes.
  • Nron_13
    Nron_13 Member Posts: 164
    info

    give us alittle info on what the problem was and how it was rectafied , were glad the people at Larrs were there to help please explan the problem that others can avoid it
    thanks
This discussion has been closed.

Categories