Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
EDR Calculations
wsdave
Member Posts: 97
I'm in the final planning phases of my boiler repiping project.
I also want to rip out the electric strip heaters that were installed, by previous owner, in the master bedroom and 2nd floor bath and replace with radiators once again.
After reading Lost Art of Steam Heating I calculated (I think) the total EDR of my system.
My calculations show that I have 35078.80 BTU/Hr more capacity!
I've located a couple of radiators that should fit nicely.
Could someone be so kind as to review what I have to see if I'm on the right track?
Thanks for all the help.
Dave
I also want to rip out the electric strip heaters that were installed, by previous owner, in the master bedroom and 2nd floor bath and replace with radiators once again.
After reading Lost Art of Steam Heating I calculated (I think) the total EDR of my system.
My calculations show that I have 35078.80 BTU/Hr more capacity!
I've located a couple of radiators that should fit nicely.
Could someone be so kind as to review what I have to see if I'm on the right track?
Thanks for all the help.
Dave
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements