buderus job pics

Mellow_2

Has anyone used the buderus circ stations? This is the first one I have tryed and it is working great. We have been very busy the past few months. I would have liked to spend more time on this one but just did not have the time. Cool thing is, the control (2107) is doing some of the work for me....... This is a house with reverse return radiant ceiling. We added a room sensor and the mixing station when we did the install and the house has never been so cozy......

They HAD two radiators ( cast iron) that would never heat off the old boiler... We ran a high temp zone to them and added a buderus radiant panel too. The three radiators have non electric valves on them and work off the modulating control(2107). I wanted to add a second room sensor but the radiators are very far apart and with such a small load I did not see the need. They might add on to the house and that might be a good spot for the second room sensor....

This job was for a very nice family with a very small basement. We had to take the back wall down to get the room we needed but it was worth it. I wonder if buderus would be interested in making a gb-142 for oil equipment? Would they call it an ob-142?

Joe@buderus_2

Thanks for the pictures and information about the job.

Steve_35

Nice looking job but I have a question.

Is the barometric damper hidden?

Weezbo

i really like the looks of these blocks *~/:)

it looks likey the "Blue Boys" have a winner there

405K is alot of Ummph.

my favorite job has an X block and oneof these ...havent had a chance to lash it up just yet...i am going for the Peterbuilt look and have been trying like heck to visualise the curvo forming in my mind.... i like the insulation on it...you sure made it look easy:) ***** stars