Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Which main vents?
superMARKet
Member Posts: 87
Here's a diagram of my steam system.
I initially figured on adding the Gorton vents that I've shown in blue, single #1s or pairs of #1s on manifolds. Then I second-guessed myself, so I doubled everything and went to #2s. That's what's shown in red.
Would I be better off with the venting shown in blue or in red?
How long should I expect it to take to vent these mains and risers with a 200MBH net boiler?
I initially figured on adding the Gorton vents that I've shown in blue, single #1s or pairs of #1s on manifolds. Then I second-guessed myself, so I doubled everything and went to #2s. That's what's shown in red.
Would I be better off with the venting shown in blue or in red?
How long should I expect it to take to vent these mains and risers with a 200MBH net boiler?
0
Comments
-
Go with the larger vents
you can't lose. I bet they vent in 1-2 minutes this way.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements