Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Used Rads and convectors?
Steamhead (in transit)
Member Posts: 6,688
call Bill Theiss, (410) HAmilton 6-7946. He's at 4251 Harford Road just below Cold Spring Lane.
Dan, this can go in your list if you wish.
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=367&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
Dan, this can go in your list if you wish.
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=367&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Have a customer with a leaking wall mounted cast iron rad, size is 45 sq ft EDR. Was wondering if anyone can help point me to any where I could purchase a good used wall mount or cast iron wall hung convector? I did find two on the web, but I thought there was one here in Baltimore Md. The customer is willing to buy a new one but would perfer a used one if possible. He had been thru several contractor's and was ready to pull the steam system out because of problems, I have brought this two pipe system back to proper operation, and now this rad is leaking. It is in a mud room, so it does not have to be perfect painted ect, just as long as it is useable. Thank's Randy0 -
-
Thank's Dan,0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 95 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 888 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements