Welcome! Here are the website rules, as well as some tips for using this forum. 
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website.  Thanks!
Fyrite Pro rental
 
            
                
                    Dirk Wright                
                
                    Member Posts: 142                
            
                        
            
                    I have a Fyrite Pro 125 + the smoke tester, but no printer. I'm getting the Fyrite Pro calibrated right now. It needed a new oxygen sensor ($$), so I was thinking that I may be interested in renting this kit out to service techs, but I don't know what is involved, if anything, and how much to charge. I was thinking that I should require at least a 500$ deposit and charge maybe 100$ per week. I'm only going to use it a few times per year, and the O2 sensor goes bad in less than two years regardless of whether or not you use the instrument. Any ideas on how to do this? I'm not a business, just a private owner.                
                0                
            Comments
- 
            here in BC
 that machine rents for $150 the first day out, $100 each day after that. A credit card is required to secure the rental.0
This discussion has been closed.
            Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 112 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements
