Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Old Stuff in Kansas City

Steamhead (in transit)
Member Posts: 6,688
could you tell if it was "homemade"?
0
Comments
-
Someone told me you guys might like this
0 -
and this
0 -
and of course this
0 -
Wow...
... and it's all still working? Perhaps you can take some more pictures of the water heater and send them to Larry Weingarten? I am sure he would appreciate them!
The big boiler is impressive, to say the least. Reminds me of Mike Mulligan and his steam engine. Thanks for sharing!0 -
This is one I worked on today. I have never seen another like it around here0 -
The original cover for the firebox is behind this Capitol Red Cap boiler and the previously used oil burner is sitting next to it....still connected to the oil line.0 -
lo pressure
I think that is a lo pressure oil burner, the kind my old boss talks about. "You could burn straight motor oil and
still have a decent flame" pretty cool!!
Still connected to the fuel line, wow.
Are you ripping it out:( Well I'm sure they will save some fuel gas or oil..
Nice pic's I love the old stuff
thanks
Rich P.0 -
Museum Pieces
James,
Thanks for sharing! Truly the Beast's of the Basement.
The jacketed boiler should be in a museum.
Keith0 -
capitol
We are removing two of those this week. A different customer wants thier unit left connected to the heating system for wood disposal. That customer has large amounts of waste wood.
I am not far from KC where is the city are these at??
Mike0 -
Might be an old Petro or Electrol burner
but it's not low-pressure. That's an old Tuthill or Waltham pump with attached regulation devices and external bypass, from the days before they packaged everything into one piece and called it a "fuel unit".
JM, curiousity is killing us on that oil burner! Do you remember what brand it was?0 -
Sorry, I don't remember the brand of the oil burner, but here
> We are removing two of those this week. A
> different wants it left connected to the heating
> system for wood disposal. That customer has large
> amounts of waste wood.
>
> I am not far from KC
> where is the city are these at??
>
> Mike
0 -
Sorry, I don't remember the brand of the oil burner, but here
are a few more0 -
how about this beauty?0 -
Here is the header for the previous boiler. It is a 2 pipe system with OE return elbows. Creative piping0 -
This one was great. It had 1/2" pipe situated at 45 degree angles in 4 rows of about 12 pipes for burners. It lit off with authority off that one small pilot burner0 -
Here is one you might enjoy.
Dave in DenverThere was an error rendering this rich post.
0 -
That's either a later
American Radiator Co gas boiler or an early American-Standard. Depends on whether it was made before or after the merger.0 -
I think
Dunkirk made that Sears boiler.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements