Welcome! Here are the website rules, as well as some tips for using this forum. 
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website.  Thanks!
MA Gasfitters and gas heating installers!
 
            
                
                    Firedragon_4                
                
                    Member Posts: 1,434                
            
                        
            
                    You may want to read this, they just changed it again, FACT! It was just sent to me by my spy, so.....
<a href="http://www.mass.gov/dpl/boards/pl/cmr_prop/amend248cmr5_08.pdf">NFPA54 changes</a> <P>
This is really good for oilheat, at this rate you won't be able to put in the highest efficiency gas equipment in a doghouse!
                <a href="http://www.mass.gov/dpl/boards/pl/cmr_prop/amend248cmr5_08.pdf">NFPA54 changes</a> <P>
This is really good for oilheat, at this rate you won't be able to put in the highest efficiency gas equipment in a doghouse!
0                
            Comments
- 
            so you still need a co detector
 Where's the big story? and you CAN put the highest efficiency equipment in a doghouse without a detector[exemption b 2 ].poor dogs ,at least the poor dogs don't have to deal with draft hoods
 To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
            Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 112 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements
