Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ceiling radiator needing a re-tap for supply

Daniel_3
Daniel_3 Member Posts: 543
I have a ceiling radiator water/steam with a 2" standard supply tapping. When this 8 foot section was being hoisted down from a demo site the union snapped causing both supply taps on the top and bottm to loose partial threading. It's certainly not major damage and can be re-tapped but I'm wondering where to find this large size tap and the best way to re-tap the supplies. I would hate to junk this beauty as I would like to re-use it. Anyone have experience with this type of problem?

Comments

  • bob young
    bob young Member Posts: 2,177
    RE-TAP

    IF THE TAPPINGS ARE NOT TOO BADLY DAMAGED SIMPLY BUY A 2 " PIPE TAP IN ANY PLUMBING SUPPLY OR OVER THE INTERNET & RETAP.
This discussion has been closed.