Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.

If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

ECM Motor testers

Eugene,

Just got Decembers issue of Thermoprides news letter, they are know offering a TECmate for diagnostics on ECM motors.

You were one jump ahead - again!

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=278&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • Glenn Harrison_2Glenn Harrison_2 Member Posts: 845
    TGO, In case you or anyone else didn't know

    GE has a whole website for the ECM motors with many files and the Tecmate tester.

    http://thedealertoolbox.com/
  • Paul Fredricks_3Paul Fredricks_3 Member Posts: 1,549


    Great site! I'm looking into the training info and possible classes for my techs. Does anyone here have experience with the tester? Will it work on anyones ECM, or just GE,... or does anyone else make an ECM other than GE?
  • TGO_58TGO_58 Member Posts: 6
    Thanks Glen

    That's a bookmark for sure!
  • Glenn Harrison_2Glenn Harrison_2 Member Posts: 845
    To the best of my knowledge,

    It only works on GE ECM Motors (Not sure who else makes one if anybody), and I'm not sure if it will work on the first genreation (1.0) ECM Motors, but the chances of finding one of those still running is pretty slim as they would be around 15 to 20 years old.

    I've had the first tester with four switches on it for several years and it has worked fine and quickly every time I've used it.
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!