Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Banging Pipes

Paul Fredricks_3
Member Posts: 1,556
Is the new circ pumping in the right direction?
0
Comments
-
Banging Pipes
I had the gas company put in a new circulator pump 3 days ago. The pipes are now making a banging noise. It is always in a different area of the house also. Any help is appreciated0 -
let me guess...
sounds like you have zone valves in the system...what circ. pump was in there and what did they replace it w/? I bet it is too big....kpc
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Its a Taco--Same one that was in there--I double checked it0 -
-
maybe they introduced some air into the system when they put the pump in. Check the fast-fill and see if the can vent on the air scoop is working, as they tend to fail over time. Just a little bit of air can make things noisy.0 -
pipes noisy
the pipes on the 1st flr. very noisy not banging, but like a loud noisy continous noise but only on the 1st flr. apt. is duplex with one theromstat, can i turn off vave downstairs and stll have heat on top flr?0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements