Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Hand-Crafted Copper Radiator
Paul Rohrs_5
Member Posts: 134
This is going to stay in the office, but will also make some appearances at home & garden shows.
Matt really is a craftsman. I will also say that this is all pre- Rems Curvo. I see a curvo in Matts future.
This would be an excellent towel warmer and several requests are being made around the shop as we speak.
I'm a little surprised Matt hasn't posted here tonight. C'mon Matt, you know you want to....
Again I am only the recipient, Matt is the Artisan.
PR
Matt really is a craftsman. I will also say that this is all pre- Rems Curvo. I see a curvo in Matts future.
This would be an excellent towel warmer and several requests are being made around the shop as we speak.
I'm a little surprised Matt hasn't posted here tonight. C'mon Matt, you know you want to....
Again I am only the recipient, Matt is the Artisan.
PR
0
Comments
-
Built for me by Matt J
I was totally blown away today when Biggerstaff Radiant's very own Matt Jarchow unveiled this. I cannot begin to thank him enough for this labor of love.
He built this from scratch and hand-bent the copper and drilled the tee's for flowing action. He used a copper tank from an old ISE hot-water dispenser and a taco 006 circulator.
I think it is wicked cool.
The arrows on each end are a spot-on match for the Biggerstaff Radiant Solutions logo.
Well done Matt, and a heartfelt thanks.
Regards,
PR0 -
Even got the logo
right there on the end....
So Paul.... towel warmer? Kids room? Sewing room? Where will it go?
That is art!0 -
very serious piece of jewelry. bob young0 -
And I was thinking, "What's Hot Rod done now?"
Very nice and completely self-contained it would appear...
Towel warmer?0 -
That is SWEET!!!
So what is the EDR???
Looks like Dan has to add another rad to his list!!!
BEAUTIFUL!
Mark H
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Towel warmer use will though test the safeties.
Fold them around the sections and it looks like you could easily get four full-size bath towels.
0 -
Copper Rad
Beautiful workmanship. Will need to be lacquered to stop it going discoloured though, Unless you want to be continuly polishing it.0 -
A very fine piece
of work. Great design and workmanship. Let us know how she performs.
hot rod
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Simply Amazing!
0 -
Gorgeous Matt!
It's a silent thousand word argument for never throwing anything away! I'd like to see a picture of the tool you bent the copper with. Kevin0 -
Amazing Workmanship
and without a curvo!
Bet someone has sore hands and forearms.
This appears to be a working unit, is there a relief valve on it? Can't see one in the pics.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Impressive
Obviously a lot of work went into that work of art. Why not protect it with a low water cutoff?0 -
test
0 -
Thank You
to everyone for all of your compliments on the rad! This little project was a labor of love for me, I love to work with my hands and with copper.
After seeing what Hot Rod has done with copper, it has inspired me to try my hand at it. I will probably never reach his level, but at least I can try? Hot Rod I don't think you have anything to worry about!
Matt J. W/Biggerstaffs0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements