Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Slab setback?
Options
Mike.C
Member Posts: 43
I am wondering if there are any drawbacks to a 2 degree night setback on a 5-6" slab setup. Just seems like a lot of extra work for the boiler.
Thanks
Thanks
0
Comments
-
if you have...
radiant floors...and especially radiant slab floor it is (in my opinion) not a good idea to use set back of any degree...there is way too much mass to bring back up in a reasonable time period...yes it goes against traditional thinking but radiant floor is not a traditional heating system in the US....Mark Eatherton just posted on this subject in another post re: energy savings...kpc
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements