Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
AFUE ?

jp_2
Member Posts: 1,935
what delta T's do you normally see on traditional bang-bang set ups?
0
Comments
-
Just curious
Having observed AFUE testing for boilers and realizing how little resemblance those conditions reflect real world operation, I have to wonder about the forced air side.
Does anyone know what the regimen or testing parameters are for forced air furnaces? I'm wondering if they are as far off the mark as they are for boilers.0 -
Boilers?
I have to say that most run under 10*. It would seem that most systems here are over pumped or under radiated.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 939 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements