Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
cast iron rad weight
Frenchie
Member Posts: 113
Thank you for responding! I appreciate it very much.
0
Comments
-
cast iron rad weight
I can't seem to find out how much the following radiator would weigh? American Radiator 8 section 38.5" high, 20" wide, by 9.5" deep. There are 2 on Ebay right now I am thinking about buying. I need to know if it would be realistic based on their weight. I live close but I am wondering if I could put 2 of them in the back of my Aerostar, and how many guys it would take to bring one of them up a flight of stairs with an appliance dolly. Thanks!0 -
-
Ever Wonder
How they delivered them bad boy when they were new ? Model T Fords and horse and wagon and no stair climbing hand trucks.. Maybe they were brought in sections and assembled on site like boilers ? "The Dead Men Knows"0 -
radiator weight
Hi Jason,
A rule of thumb for estimating weight is 7 or 8 pounds per square foot of EDR. The radiator you describe is around 48 square feet EDR, so 48 x 8 = 384# or so.
Best regards, Pat0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements