Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Larrs Mascot

hr
hr Member Posts: 6,106
in THE MAIN WALL
I installed one this past summer in my father in laws place. The install went smoothly, they include a nice cardboard mounting templete.

Mine is a combo unit with a plate HX to provide DHW. And it does effortlessly. Plenty for their family of two.

It did take a lot of gas valve adjustment to get the loud ignition and combustion numbers in line. A combustion analyzer is a must. Installation directions could use a re-write.

hot rod

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=144&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • bordy
    bordy Member Posts: 17


    Does anyone have experience with the Larrs mascot?
    What do you think of it.
  • Unknown
    Unknown
    baxi

    i just installed a Baxi Luna 330 HT combi, which as far as i can tell is identical to the Mascot. easy installation, they pack a lot in a small package. and i concur that a combustion analyzer is a must, very fussy with gas pressure, but once dialed in is fine. it aint no vitodens, but is well built and good value.
This discussion has been closed.

Categories