Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

Tekmar 256-2 wiring

carol_3carol_3 Member Posts: 397
Since you're a contractor, it seems you're in a really good position to contact tekmar for help, or your distributor. I don't think many of the details you mention really matter beyond your statement that you don't understand the outdoor reset instructions.

Comments

  • Brant BeachBrant Beach Member Posts: 15
    Tekmar 256-2 wiring

    I have never installed an outdoor reset. I am not understanding the wiring instructions that were included with control. I thought it had to be wired into the burner circuit only.
    The system is a new Burnham p204 nat. gas/standing pilot, with 2 Taco esp zone valves, baseboard rads, building is vacation home.
    I am afraid to make a mistake on the wiring and have the place freeze up, because there is no one there during the week to tell me if its not working.
    Thanks for any help. Brant
  • carol_3carol_3 Member Posts: 397


    Are you a contractor?
  • Brant BeachBrant Beach Member Posts: 15


    I am a plumbing contractor. We don't have much heat work any more. Everyone wants A/C now. Brant
  • Brant BeachBrant Beach Member Posts: 15


    Ok I will find help elsewhere, sorry to bother you.
  • hydronicsmikehydronicsmike Member Posts: 855
    tekmar Tech Support

    250-545-7749.

    Please call. We'll answer any questions you may have.

    Regards,

    Mike
  • carol_3carol_3 Member Posts: 397


    thanks much!
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!