Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vaporstat vs Pessuretrol
JoeV
Member Posts: 62
If 1 to 2 psi is a good, efficient pressure to run boilers, why do pressuretrols go up to 5psi or more? Why not limit them to 3?
Same with pressure gages going from 0-15, why not 0-5?
It seems to me that you would want your parameters at midscale and not bottom of scale for better accuracy.
Same with pressure gages going from 0-15, why not 0-5?
It seems to me that you would want your parameters at midscale and not bottom of scale for better accuracy.
0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 973 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements