Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
78+ negative 80 = 79 series
Dave Palmer_3
Member Posts: 388
a customer cook a rear section of a 4 year old W/M 678 over the weekend.We got a 80 series section & draft hood ,gaskets up and running after being down just a day. Glad it wasn't nipples or I'd still be sectioning it.I built the boiler for easy dis-assembly but didn't expect it to have been me. Loop off tankless feeds two space heaters in the morgue,yea in a funeral home but its quiet.Dave
0
Comments
-
had
to go back today,aquastat for loop died,must have cooked too.Of course it didn't do it when we were working on it0 -
Nice coincidence
We replaced a whole 478 steamer a few weeks ago . Which I installed in place of another 78 4 years ago , following a 2 section replacement I did in 96 . Sound repetitive ? BIG water leak somewhere in that residence that noone can find . The O rings make these replacement far easier than push nipples . But I still like the push nipple seal better . Good job Dave .0 -
thanks Ron
yea break down and bolt up would have sucked with push nipples,Dave0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements