Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Mixing CI baseboard and fin tube on same system

Options
KAB_2
KAB_2 Member Posts: 15
in THE MAIN WALL
Due to artistic differences, (yes that's really the reason) we're being asked to mix. Can that be done with different zones, TRV's etc. Thanks guys.

Comments

  • CMadatMe
    CMadatMe Member Posts: 3,086
    Options
    As Long

    As they are on different zones sure. You could also run them at different temps but that would depend on each rooms heatloss and the room emmitters capable output. Have plenty of systems running higher temps for fintube and lower temps for cast iron.

    There was an error rendering this rich post.

  • KAB_2
    KAB_2 Member Posts: 15
    Options
    Thank you

    Chris -Thanks so much, thought that was the case, appreciate the info. 
This discussion has been closed.

Categories