To get email notification when someone adds to a thread you're following, click on the star in the thread's header and it will turn yellow; click again to turn it off. To edit your profile, click on the gear.
The Wall has a powerful search engine that will go all the way back to 2002. Use "quotation marks" around multiple-word searches. RIGHT-CLICK on the results and choose Open Link In New Window so you'll be able to get back to your results. Happy searching!
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.

More on Power Gas Burner Conversions

Tim McElwainTim McElwain Posts: 3,156Member ✭✭✭
What do you think about boiler manufacturers taking existing design oil steam and forced hot water boilers and factory installing gas power conversion burners in them testing them and and selling them?
· ·


  • SWEISWEI Posts: 4,554Member ✭✭✭

    Where do we sign up?
    · ·
  • MarkSMarkS Posts: 464Member ✭✭✭

    Given the level of interest in power gas burners you'd think more boiler manufacturers would have done this by now.
    Links: EcoSteam | A Steam Odyssey | Odyssey 2 | Odyssey 2014 | A Steam Enthusiast's Outdoor Reset Control
    Royersford PA | 1890 one-pipe steam system | 3009 sf | 3 floors | 14 radiators | Utica SFE boiler
    Midco LNB-250 Modulating Gas Burner | EcoSteam modulating controls | 70 to 300 MBH |
    607 sf EDR connected load | Operating pressure: 0.5 oz | 4 mains, 135 ft | All Gorton vents
    · ·
  • SteamheadSteamhead Posts: 8,910Member ✭✭✭
    Bring 'em on!

    Hey Burnham- are you listening? We want a gas MegaSteam!
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    · ·
  • SWEISWEI Posts: 4,554Member ✭✭✭
    Every mod/con boiler

    is based around a low-NOx modulating power gas burner.  Midco obviously noticed this, and there are a number of large burner manufacturers using similar designs (they may well have been first for all I know.)
    · ·
This discussion has been closed.


It looks like you're new here. If you want to get involved, click one of these buttons!