The WallClick here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
wcs5050
About
- Username
- wcs5050
- Joined
- Visits
- 164
- Last Active
- Roles
- Member
- Points
- 58
- Badges
- 9
- Posts
- 126
-
Re: Cycle Guard - Too much water in boiler
There are dip switches on the Uni match feeder that change the dwell and feed times. Also this feeder comes with orifices that control rate of flow through it. There are 3 sizes of rubber discs meant… (View Post)
-
Re: Munchkin 80m (R1) boiler issues (Boston)
Fw webb, Portland Group, or Ferguson can get parts from Emerson Swan for HTP. Day or two. (View Post)
-
Re: No thermal roll out fuse
Rollout and draft switch generally not seen until late 80s. See this a lot. If I replace a gas valve on pre-safety switch unit I add both to burner circuit as a rule. There is some scary antique gas … (View Post) -
Re: Viessmann Disappointment
Just saw the Vitocrossal in the viessman truck. Pretty sure the model is brand new this year. Nice boiler. All set up to pipe like a conventional boiler with no added exterior pri/sec. Easy burner cl… (View Post) -
Re: New Steam Boiler Installed-Feel Free to Comment
Black iron bypass energized with fresh water between backflow and pressure redux valve should be copper. Wonder what the logic on the backflow relief air gap is. As mentioned black iron out of relief… (View Post)
